Transformer overhauled for TATA Steel
EPMS 2010 LTD recently successfully removed a 1.5 MVA Transformer from a large steel making facility at TATA Steel and returned it to our Birmingham works for a complete strip down and refurbishment Oil was drained from transformer, radiators removed, windings were then de tanked . Then the transformer was mechanically and electrically checked. The […]
Expanded Servicing Capability
EPMS 2010 have recently aqcuired a third van to assist in servicing our customers nationwide. The addition to fleet of service vans will allow us to respond more rapidly to customer requests for site service at any one time. Thus allowing our engineers to independently travel straight to site with extra capacity, more plant on […]
Steinert Eddy Current Separator Specialist Refurbishment
EPMS 2010 have just completed the refurbishment of a two metre long Steinert Eddy Current Seperator from a one of Scotland’s leading recycling companies. The original unit was badly damaged when it first arrived at our works. The ECS was completely stripped down and all high speed bearings and also all large roller bearings where […]
New Four Foot Radial Arm Drill
EPMS 2010 have recently bought a new radial arm drill with 4 feet arm with large No 5 morse taper capacity. The new drill will increase our in house machining capabilities and increase the range of work we can undertake ourselves thus allowing us to provide a fast efficient drilling and boring facility. Another advantage […]
Steinert Drum Magnet Refurbishment
A Steinert drum magnet recently arrived at our works for repair, Upon inspection it was found that the drum would not rotate due to bearing failure.Once the drum was dismantled it was clear that the coils had also been damaged due to the drum skin dropping down when the bearings failed. The main coil on […]
3 off Vibratorary Magnet Refurbishment
EPMS 2010 recently received 3 vibratory magnets from a large steel works in the north east of England, These magnets were scheduled for complete overhaul and refurbishment and weighed in at over 2.5 tonnes each. Upon dismantling we identified that each unit had several coils which needed rewinding. All 3 units were working in hazardous […]
EPMS 2010 New Lightweight 45 inch, 7.5 kW circular magnet
EPMS 2010 has just supplied a new lightweight 45inch, 7.5kw circular lifting magnet to a scrap metal recycling company in Coventry The magnet was completely manufactured at our works in Birmingham along with windings and machining and the magnet has a robust case with 8mm manganese bump plate and 50 mm of wear on both […]
Dynometer Coil
EPMS 2010 are now a UK manufacturer of Dyno coils up to 800mm diameter. This particular coil was a straight replacement for a AG150 coil assembly which had been removed from a dynamometer for repair. The coil had seen significant ingress of water over a period of time and had finally failed electrically. It was decided to be more […]
Steinert 1.6 metre wide electromagnetic over band repair
A recycling yard in the West Midlands recently sent their over band magnet in for repair which required the bottom manganese plate replacing after years of service. Our works removed the old one and cleaned all windings, replacing damaged insulation and re-varnishing coils. Then we folded the new 6mm plate to match the original non magnetic […]
Steinert non-drive bearing failure and repair
This Steinert drum magnet was recently repaired at our works. The drum skin has been repaired and all coils were removed and re-insulated in order to bring them back to original electrical insulation specification. This particular drum came in for repair following a non drive end bearing failure which resulted in the drum needing a […]